Understanding Weight and Balance
To “feel” the aircraft response through the flight controls as being “heavier or lighter” than anticipated at take-off can result from a weight & balance inaccuracy. In fact, when the CG is out of the operational limits, the safety consequences can be far more critical than just a strange feeling.
Landing on contaminated runways
Landing performance is a function of the exact landing runway conditions at the time of landing. A simple statement for a more complex reality. Indeed, knowing what exact contamination is or remains on the runway at a given point in time is often challenging.
Tidy cockpit for safe flight
One would not normally think of everyday life objects, apparently as inoffensive as a pen or a cup of coffee, as being a real threat to the safe operation of a commercial flight. Yet, leaving them unsecured or forgotten in a cockpit could rapidly turn them into real trouble makers…
Learning from the evidence
In September 2014, Airbus will inaugurate its new A350 pilots Type-Rating course. The drivers for this development were both the EBT (Evidence-Based Training) principles and an analysis of natural learning mechanisms.
Control your speed… at take-off
One of the most critical decisions that every line pilot may potentially encounter during every take-off is to continue or abort the procedure; hence the essential need to properly monitor the airspeed during this phase.
Flight Data Analysis (FDA), a Predictive Tool for Safety Management System (SMS)
Flight Data Recording
Airbus Brake Testing
Regulatory aircraft performance is certified as a set of performance models and aircraft physical characteristics that are built and validated from flight test data. While the primary purpose of these models has always been to allow computation of aircraft performance for dispatch, the models used to determine the in-flight landing distances during approach preparation are […]
Flying a Go-Around Managing Energy
Airbus recently performed some research on the quality of go-around execution. This involved examining nearly 500,000 approaches flown by many airlines from around the world.The results highlighted that in some cases crews are choosing not to apply the Airbus Standard Operating Procedure (SOP) for the go-around phase.Particularly when a go-around was performed above 1,200 ft, […]
Hard Landing, a Case Study for Crews and Maintenance Personnel
In this article, Airbus would like to take you through a case study and use it to learn some lessons and share our safety first culture. The article is split into three distinct parts:The first will describe the eventThe second, targeted at flight crews, will discuss and develop the stabilization criteria and present a prevention […]