Progress to Pinpoint an Aircraft’s Position
There are currently around 33 million commercial flights a year and this figure is expected to double in the next 15 years. An aircraft arriving safely at its destination, and within a predictable time, is an expectation of both its crew and passengers. A growing number of apps are also available to the public that […]
Troubleshooting Airframe Vibrations
As moveable structural components such as control surfaces and landing gear doors age, wear of hinges and actuators can sometimes lead to airframe vibrations. These vibrations can cause noise and physical discomfort in the passenger cabin.To prevent further deterioration of components, the cause of vibration should be quickly identified and removed. For this, maintenance personnel […]
Preventing Falls from Height
Falling from an aircraft can cause serious injuries to people.Specific safety equipment is installed on Airbus aircraft, and when used correctly, can prevent falls from height. This article describes the available safety equipment for Airbus aircraft and recalls the basic safety precautions that will help to avoid falling from height injuries to everyone on the […]
Introduction to the Soft Go-Around Function
The “all engines” go-around is a very dynamic procedure with high accelerations created by the application of TOGA thrust. Yet in-service experience has shown that as long as both engines are operating, a lower thrust can still be sufficient to perform a safe go-around.As a safety enhancement, Airbus has introduced the Soft Go-Around (SGA) function, […]
Preparing Flight Crews to Face Unexpected Events
During an approach at night-time into Glasgow Airport, the crew of an easyJet A319 experienced a strong cross-wind and turbulent conditions, which created a WINDSHEAR alert and led them to perform a go-around.As they did this, PFD information including Flight Modes Annunciator, Flight Director bars, and characteristic speeds all disappeared from both PFDs. In addition, […]
Safely Flying Non-Precision Instrument Approaches
Historically the distinction between flying ILS/MLS and non-precision approaches was very clear. However, many new kinds of instrument approaches are now available and this makes the distinction less obvious. What remains true today for any approach is that disregarding basic flying techniques and procedures reduces safety margins.This article clarifies which technologies are available to perform […]
180° turns on runway
Performing a 180° turn or U-turn on a runway may seem an ordinary maneuver compared to other phases of the flight. However, operational experience over the past 10 years shows that unintentionally leaving the runway while completing a U-turn can happen, even to experienced pilots, in any conditions, even on dry runway, on any aircraft […]
Optimum use of weather radar
In recent years, there have been a number of flights where passengers or crew suffered injuries due to severe turbulence. In some other instances, the aircraft structure was substantially damaged following a hailstorm encounter. Clearly adverse weather can pose a threat to the safe and comfortable completion of a flight, thus it needs to be […]
Pitot Probe Performance Covered On the Ground
Pitot probes inlet obstruction will affect accuracy of the air data parameters calculated from its measurements such as the aircraft airspeed and Mach number. Pitot probes inlet obstruction on the ground can be caused by unexpected sources such as sand, dirt, dust or insect nesting activity. This is why it is important to think about […]
Lithium batteries: safe to fly?
Today, lithium batteries play a barely visible, yet essential role in both our daily life and aviation alike. Manufactured and handled correctly, lithium batteries are safe. But production failures, mishandling, or not being aware of their specific characteristics can have serious repercussions.